A-A-52536 - Contact, Electrical No. 12, 14, And 16 A.W.G.
This CID covers electrical contacts used in waterproof, electrical connectors.
A-A-55485 - Mounting Pads, Electrical-Electronic Component, General Requirements For
This CID covers the general requirements for electrical-electronic component mounting pads. Requirements for specific mounting pads are covered in the individual CID specification sheets. Mounting pads covered by this CID are intended for commercial/industrial applications.
A-A-55485/1 - Mounting Pads, Electrical-Electronic Component, .100 Diameter Pin Center
A-A-55485/10 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Diameter Pin Center
A-A-55485/11 - Mounting Pads, Electrical-Electronic Component, Vertical Type
A-A-55485/2 - Mounting Pads, Electrical-Electronic Component, .200 Or .230 Diameter Pin Center
A-A-55485/3 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .100 Diameter Pin Center To A Larger Diameter
A-A-55485/4 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Or .230 Diameter Pin Center To A Larger Diameter
A-A-55485/5 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Or .230 Diameter Pin Center To A Grid Pattern
A-A-55485/6 - Mounting Pads, Electrical-Electronic Component, For Relays And Discrete Components
A-A-55485/7 - Mounting Pads, Electrical-Electronic Component, Multiple Applications
A-A-55507 - Clip, Electrical, Fuse, General Requirements For
This CID covers the general requirements for electrical fuse clips. Requirements for specific electrical fuse clips are covered in the individual CID sheets. Electrical fuse clips covered by this CID are intended for commercial/industrial applications.
A-A-55507/1 - Clip, Electrical, Fuse, 30 And 60 Ampere, For Fuse Diameters 1/4 Inch Thru 13/16 Inch
AN3435 - Terminal Block - Electrical
MIL-B-13106 - Buzzer (Interrupter Bz-7 ( ))
MIL-C-13373 - Case, Meter Cy-1626( )/U
MIL-C-39027/1 - Readout, Style Rp01 (Twelve Message Unit)
MIL-C-55422/2 - Clip, Electrical, Anode
MIL-C-55422/3 - Clip, Electrical, Anode
MIL-C-55422/4 - Clip, Electrical, Anode
MIL-C-71044 - Circuit Card, Battery Test: 11784531
This specification covers the requirements and tests for the Battery Test Card, which is a component in the Electronic Control Unit (ECU). The ECU is a part of the Target Holding Mechanism/Tank Gunnery (THM/TG).
MIL-D-23859 - Delay Lines, Pulse, Electromagnetic, Fixed, General Specification For (S/S By Mil-D-83531)
This specification covers the general requirements for fixed (tapped, untapped and sectionalized) electromagnetic pulse delay lines for use in Armed Services electronic equipment. This specification is not intended to cover active lines, delay cables, electro-mechanical, magnetostrictive, photoeleastic, semi-conductive, or acoustic delay devices.
MIL-D-23859/1 - Delay Line, Pulse, Electromagnetic, Fixed Style Pa
MIL-D-23859/10 - Delay Line, Pulse, Electromagnetic, Fixed Style Pk
MIL-D-23859/11 - Delay Line, Pulse, Electromagnetic, Fixed Style Pl
MIL-D-23859/12 - Delay Line, Pulse, Electromagnetic, Fixed Style Pm
MIL-D-23859/13 - Delay Line, Pulse, Electromagnetic, Fixed Style Ra
MIL-D-23859/2 - Delay Line, Pulse, Electromagnetic, Fixed Style Pb
MIL-D-23859/23 - Delay Lines, Pulse, Electromagnetic, Lumped Constant (S/S By Mil-D-83531/1)
MIL-D-23859/3 - Delay Line, Pulse, Electromagnetic, Fixed Style Pc
MIL-D-23859/4 - Delay Line, Pulse, Electromagnetic, Fixed Style Pd
MIL-D-23859/5 - Delay Line, Pulse, Electromagnetic, Fixed Style Pe
MIL-D-23859/6 - Delay Line, Pulse, Electromagnetic, Fixed Style Pf
MIL-D-23859/7 - Delay Line, Pulse, Electromagnetic, Fixed Style Pg
MIL-D-23859/8 - Delay Line, Pulse, Electromagnetic, Fixed Style Ph
MIL-D-23859/9 - Delay Line, Pulse, Electromagnetic, Fixed Style Pj
MIL-D-83531/2 - Delay Lines, 10-Tap, Dual-In-Line, 16-Pin
MIL-D-83531/3 - Delay Lines, 20-Tap, Dual-In-Line, 24-Pin
MIL-DTL-55422 - Clip, Electrical, Grid And Anode, General Specification For
This specification establishes the general requirements for grid and anode types of electrical clips for electron tubes.
MIL-DTL-55422/1 - Clip, Electrical, Grid
MIL-DTL-83413/7 - Connectors And Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector For Types I And Iii Grounding Assemblies, Aluminum Clip, Electrical
MIL-DTL-83528 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, General Specification For
This specification establishes the general requirements for electrically conductive elastomeric shielding gaskets. These gaskets are intended for use in electromagnetic interference/radio frequency interference suppression applications.
MIL-DTL-83528/1 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Circular Strip, .040 Through .250 Diameter
MIL-DTL-83528/10 - Gasketing Material, Conductive, Elastomer, Electrical, Emi/Rfi, Channel Strip
MIL-DTL-83528/11 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Hollow O-Strips
MIL-DTL-83528/14 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, For Use In Time Totalizing Meters Covered By Mil-M-7793
MIL-DTL-83528/2 - Gasketing Material, Conductive Shielding Gasket, Electrical, O-Ring, Standard
MIL-DTL-83528/3 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Solid "D" Shaped Strip
MIL-DTL-83528/4 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Emi/Rfi, Connector Flange Mount
MIL-DTL-83528/5 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, O-Ring, Non-Standard
MIL-DTL-83528/7 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Hollow D-Strip
MIL-DTL-83528/8 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Hollow P-Strip
MIL-DTL-83528/9 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Solid Rectangular-Strip
MIL-E-10004 - Electronic Standard And Nonstandard Parts, Materiels, And Processes In Signal Corps Equipment
MIL-E-48223 - Electrocoulometer, Dual Anode, Two Microampere Hours And Nine Hundred And Sixty Microampere Hours Capacity
This specification establishes the quality and product assurance acceptance and qualification requirements for one type of dual anode electrocoulometer (two microampere hours capacity on one anode and nine hundred and sixty microampere hour capacity on the other anode).
MIL-F-12201 - Fan, Ventilating, Propeller (Ventilator Ph-255-) ()
MIL-F-12416 - Footswitch Sa-103( )/Frc
MIL-F-4273 - Foil, Magnetic Shielding, 0.003 Inches Thin-Gage Steel (Use Mil-S-4473)
MIL-F-55561 - Foil, Copper, Cladding For Printed Wiring Boards (See Notice 1 For Replacement Information)
MIL-G-13451 - Gage, Dimensional Control, Mechanical (For Signal Corps Equipment)
MIL-G-47197 - Gasket, Shielding, Electronic-Oriented Wires Embedded In Silicone Rubber, Pressure Seal
MIL-G-55636 - Glass Cloth, Resin Preimpregnated (B-Stage) (For Multilayer Printed Wiring Boards) (S/S By Mil-P-13949)
MIL-H-83416 - Heater, Electrical (For Heating Electrical And Electronic Equipment)
MIL-H-83416/1 - Heater, Electrical (For Heating Electrical And Electronic Components)(24.18 Watts Maximum Input Power)
MIL-H-83416/2 - Heater, Electrical (For Heating Electrical And Electronic Components) (10.7 Watts Maximum Input Power)
MIL-H-83416/3 - Heater, Electrical (For Heating Electrical And Electronic Components) (9.72, 8.8, 8.03, 15.79, 0.21, 0.64, 13.69, 43.66, 77.12, A 43.42 Watts Maximum Input Power)
MIL-H-83416/4 - Heater, Electrical (For Heating Electrical And Electronic Components) (48.96 Watts Maximum Input Power)
MIL-H-83416/5 - Heater, Electrical (For Heating Electrical And Electronic Components) (20.32 Watts Maximum Input Power)
MIL-H-87111 - Heat Sinks, Semiconductor Devices, General Specification For
This specification covers the general requirements for heat sinks used in conjunction with semiconductor devices (see 6.1).
MIL-H-87111/1 - Heat Sinks-Insulators, Class 1, 4, 6, And 7 (Wafer Type) (S/S By Nas-4117)
MIL-H-87111/2 - Heat Sinks, Semiconductor Devices, Material Classes 2, 3, And 5 (Retainer Clip Type) (S/S By Nas-4118)
MIL-H-87111/3 - Heat Sinks, Electrical-Electronic Component Class 1 And 2 (Press-On Type) (S/S By Nas-4119)
MIL-H-87111/4 - Heat Sink, Semiconductor Devices, Class 1 (Encapsulating Type) (S/S By Nas-4120)
MIL-H-87111/5 - Heat Sinks, Electrical-Electronic Component, Semiconductor Device, Class 1 (Formed) (S/S By Nas-4121)
MIL-H-87111/6 - Heat Sinks, Semiconductor Devices, Class 1 (Extruded) (S/S By Nas-4122)
MIL-H-87111/7 - Heat Sinks, Semiconductor Devices, Class 1, (For Dual-In-Line Packages) (S/S By Nas 4123)
MIL-H-87111/8 - Heat Sinks, Semiconductor Devices, Class 2 (Dual-Link) (S/S By Nas-4124)
MIL-M-38527 - Mounting Pads, Electrical-Electronic Component, General Specification For (S/S By A-A-55485)
MIL-M-38527/1 - Mounting Pads, Electrical-Electronic Component, .100 Diameter Pin Center (S/S By A-A-55485/1)
MIL-M-38527/10 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Diameter Pin Center (S/S By A-A-55485/10)
MIL-M-38527/11 - Mounting Pads, Electrical-Electronic Component, Verticle Type (S/S By A-A-55484/11)
MIL-M-38527/2 - Mounting Pads, Electrical-Electronic Component, .200 Or .230 Diameter Pin Center (S/S By A-A-55485/2)
MIL-M-38527/3 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .100 Diameter Pin Center To A Larger Diameter (S/S By A-A-55485/3)
MIL-M-38527/4 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Or .230 Diameter Pin Center To A Larger Diameter (S/S By A-A-55485/4)
MIL-M-38527/5 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Or .230 Diameter Pin Center To A Grid Pattern (S/S By A-A-55485/5)
MIL-M-38527/6 - Mounting Pad, Electrical-Electronic Component, Relay And Discrete Component (S/S By A-A-55485/6)
MIL-M-38527/7 - Mounting Pads, Electrical-Electronic Component, Multiple Applications (S/S By A-A-55485/7)
MIL-M-38527/8 - Mounting Pads, Electrical-Electronic Component, .002, .005, And .010 Inch Thick (S/S By Mil-I-49466/1 & Mil-I-49466/2)
MIL-M-38527/9 - Mounting Pads, Electrical-Electronic Component, Hardware For Mounting (S/S By Mil-I-49466/1 And Mil-I-49466/2)
MIL-M-55183 - Micromodules, Design, Construction, And Application Of (For Army Electronic Equipment)
MIL-M-83436 - Multiwire Interconnections Boards (Plated-Through Holes) (See Notice 1 For Replacement Information)
MIL-P-13949/1 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Px, Paper Base, Epoxy Resin, Flame Resistant, Copper-Clad (S/S By Mil S-13949/4)
MIL-P-13949/14 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Gy, Glass Base Woven, Polytetrafluoroethylene Resin, Flame Resistant, For Microwave Application, Copper-Clad
MIL-P-13949/3 - Plastic, Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Ge, Glass Base, Woven, Majority Difunctional Epoxy Resin, General Purpose, Copper-Clad (S/S By Mil-P-13949/4)
MIL-P-13949/6 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Gp, Glass Base, Non Woven, Polytetrafluoroethylene Resin, Flame Resistant, Copper-Clad
MIL-P-13949/7 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Gf, Glass Base, Nonwoven, Polytetrafluoroethylene Resin, Flame Resistant, For Microwave Application, Copper-Clad
MIL-P-13949/8 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Gt, Glass Base, Woven, Polytetrafluoroethylene Resin, Flame Resistant, Copper-Clad
MIL-P-13949/9 - Plastic Sheet, Laminated, Metal-Clad (For Printed Wiring Boards), Base Material Gx, Glass Base, Woven, Polytetrafluoroethylene Resin, Flame Resistant, For Microwave Application, Copper-Clad
MIL-P-21193 - Printed Wiring, General Specification (Use Mil-P-55110)
MIL-P-27538 - Plastic Sheet, Fep&Fluorocarbon (Unfilled) Copper Clad (For Printed Wiring)
MIL-P-55424 - Printed Wiring Boards, Multilayered (S/S By Mil-P-55110 Now Mil-Prf-55110)
MIL-P-55617 - Plastic Sheet, Thin Laminate, Metal Clad (For Printed Wiring, Primarily For Multilayer (S/S By Mil-P-13949)
MIL-P-55640 - Printed Wiring Boards Multilayer (Plated Through Hole) (Use Mil-P-55110)
MIL-P-82585 - Printed Wiring Board (S/S By Mil-P-55110 Now Mil-Prf-55110)
MIL-PRF-83531 - Delay Lines, Passive, General Specification For
This specification covers the general requirements for fixed passive (tapped and untapped) pulse delay lines. The specification has two product levels, a high reliability screening level "M" and screening level "C".
MIL-PRF-83531/1 - Delay Lines, 10-Tap, Dual-In-Line, 14-Pin
MIL-PRF-83532 - Delay Lines, Active General Specification For
This specification covers the general requirements for fixed (tapped and untapped) pulse delay lines.
MIL-PRF-83532/1 - Delay Lines, 14-Pin Dip Compatible, 5 Tap
MIL-PRF-83532/2 - Delay Lines, 14-Pin Dip Compatible, 5 Tap
MIL-PRF-83532/3 - Delay Lines, 14-Pin Dip Compatible, 10 Tap
MIL-PRF-83532/4 - Delay Lines, 14-Pin Dip Compatible, 3 Delay Circuits Per Package
MIL-PRF-83532/7 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, Ttl Compatible, With Input Buffer
MIL-R-39027/2 - Readout, Style Rb01
MIL-S-47235 - Shielding, Magnetic, Foil, Sheet
MIL-S-49433 - Surface Acoustic Wave Devices, General Specification For
MIL-S-55620 - Substrates, Ceramic, For Deposition Of Thin Film Microciruit (Refer To Mil-Std-883)
MIL-STD-1276 - Leads For Electronic Component Parts
This standard establishes the method of identifying, specifying, and limiting to a minimum the combinations of basic materials, the thickness and composition of the plating used therewith, and the sizes of wire and flat wire (ribbon) leads on electronic and electrical parts when they are to be soldered or welded during assembly in equipment.
MIL-STD-1495 - Multilayer Printed Wiring Boards For Electronic Equipment (S/S By Mil-Std-275)
MIL-STD-1569 - Requirements For The Repair & Modification Of Printed Wiring Assemblies (S/S By Mil-P-28809)
MIL-STD-429 - Printed Wiring & Printed Circuit Terms & Definitions (See Ansi/Ipc-T-50)
MIL-W-47056 - Wire, Mesh, Knitted, Steel, Copper-Clad, Tin Coated
MMPA0100 - Permanent Magnet Materials
This standard defines magnetic, thermal, physical and mechanical characteristics and properties of commercially available permanent magnet materials.
MS16122 - Choke, Radio Frequency Molded (Lt5K101 To Lt5K114, Incl.)
MS16221 - Choke, Radio Frequency, Molded (Use Ms-91189)
MS16222 - Choke, Radio Frequency, Lt7K233 To Ltk252, Inclusive (S/S By Ms 90542)
MS16223 - Chokes, Radio Frequency, Molded, Lt7K211 To Lt7K232, Inclusive
MS16224 - Chokes, Radio Frequency, Molded, Lt7K125 To Lt7K144, Inclusive (Use Ms 75008)
MS16225 - Chokes, Radio Frequency, Molded, Lt7K102 To Lt7K124, Inclusive (Use Ms18130)
MS16226 - Chokes, Radio Frequency, Molded, Lt7K145 To Lt7K187, Inclusive
MS16441 - Chokes, Radio Frequency, Hermetically Sealed In Metallic Cases (Lt7K042 Thru Lt7K047) (Use Ms18132)
MS16444 - Chokes, Radio Frequency, Plastic Encased (Lt8K067 Thru Lt8K072)
MS16445 - Chokes, Radio Frequency, Plastic Encased (Lt8K073 Thru Lt8K087)
MS16447 - Choke, Radio Frequency, Plastic Encased (Lt8K099 Thru Lt8K101)
MS16454 - Choke, Radio Frequency (Lt4K001)
MS17177 - Connector, Receptacle (Grounded) With Switch Dpst, 125 Volt, 3 Amps (S/S By Mil-R-2726/43)
MS27148 - (
Images) Contact, Electrical No. 12, 14, And 16 A.W.G. (S/S By A-A-52536)
MS27574 - ( Images) Cable, Aircraft And Age Grounding (S/S By Mil-Dtl-83413/1 And Mil-C-83413/3)
NAS4123 - New: Heat Sink, Electrical-Electronic Component, Semiconductor Devices, For Dual Inline Packages (Dip)
QPL-39027-4 - Readouts, Incandescent Type, General Specification For
QPL-55617-24 - Plastic Sheet, Thin Laminate, Metal Clad (For Printed Wiring, Primarily For Multilayer) (See Mil-P-13949 And Qpl-13949)
QPL-55636-22 - Glass Cloth, Resin Preimpregnated (B Stage) (For Multilayer Printed Wiring Boards) (See Mil-P-13949 And Qpl-13949)
QPL-83416 - Heater, Electrical (For Heating Electrical And Electronic Equipment)
QPL-83528-41 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83531-7 - Delay Lines, Passive, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-83532-8 - Delay Lines, Active, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QQ-M-60 - Magnet Materials, Permanent
W-C-440 - ( Images) Clip, Electrical, General Specification For (S/S By A-A-59466)
Drum
This specification covers a diesel-engine-powered, towed-type, smooth-drum, vibratory roller.
MIL-R-52562 - Reeling Machine, Cable, Engine Driven
This specification covers a reeling machine for use in the field and aboard vessels for reeling wire rope onto or off standard military steel cable reels.
MIL-R-52586 - Roller, Towed, Sheepsfoot, High Speed
MIL-R-52934 - Roller, Vibratory, Self-Propelled
This specification covers a commercial, self-propelled vibratory roller.
MIL-R-55411 - Reeling Machine, Cable, Motor Driven Rl-189( )/G And Rl-190( )/G
MIL-R-587 - Rooter, Road, Cable-Controlled
MIL-R-82095 - Roller, Motorized, Tandem, 3-Axle, Ded, 13 To 20 Tons
MIL-S-16328 - Spreader, Concrete, Form Riding, 20- To 25-Foot Width
MIL-S-16373 - Subgrader, Form-Riding (20-To 25-Foot Width)
MIL-S-22989 - Strike-Off, Concrete Paving, Form-Riding (20- To 25-Foot Width)
MIL-S-23168 - Spreader, Aggregate, Self-Propelled, Pneumatic-Tired, Ded
MIL-S-23436 - Sprayer, Emulsion, Concrete Curing, Drum Mounted
MIL-S-28556 - Spreader, Loose Material, Dry Cement
MIL-S-28569 - Subgrader, Self-Propelled, Automatic Steering, Ded
MIL-S-28574 - Screed, Vibratory, Concrete, Manually Operated
This document covers manually operated, gasoline-engine and pneumatic-powered, vibratory screeds, referred to as screeds, for striking-off freshly placed concrete slabs.
MIL-S-28610 - Saw, Concrete, Tandem Blade, 25 Foot Cut
MIL-S-29208 - Spreader, Material, Power Driven, Truck Mounted, Commercial (S/S By Oo-S-2896)
MIL-S-464 - Spreader, Aggregate, Towed Type, Traction Powered
This specification covers one type of towed, traction-powered, aggregate spreader.
MIL-S-4984 - Saw, Abrasive Disk, Masonry, Gasoline-Engine-Driven (S/S By Mil-S-52212)
MIL-S-52212 - Saw, Abrasive Disk, Concrete, Gasoline Engine Driven, Self Propelled, 12 To 18 Inch Blade
This specification covers an engine-driven, self-propelled saw using a circular blade for sawing concrete and asphalt materials containing hard aggregate.
MIL-S-52357 - Spreader, Loose-Material, Towed, Traction-Powered
MIL-S-83806 - Saw Set, Concrete And Asphalt, 70 Hp, For Rapid Runway Repair Applications
This specification covers a saw set consisting of two concrete and asphalt saws and their associated support trailer. The set is designed to support Rapid Runway Repair operations using the concrete slab method of repair.
MIL-STD-630 - Distributor, Bituminous Material, Tank And Tankless Type
MIL-T-22893 - Tamping Machine, Form, Concrete Paving, 8 Inches To 12 Inches
MIL-T-28623 - Tamper, Vibrating Type, Ged (Replaced By A-A-50499)
This specification covers a manually controlled, vibrating plate type tamper, powered by a gasoline engine.
MIL-T-52831 - Tamper, Ram Type, General Backfill, Gasoline Engine Powered, Hand Operated Commercial Construction Equipment (Cce)
This specification covers a commercial, hand operated, gasoline-engine-powered, ram type, general backfill, soil tamper.
MIL-T-52896 - Truck, Concrete, Mobile Mixer, 8 Cubic Yard, Commercial Construction Equipment (Cce)
This specification covers a truck-mounted, 8 cubic yard, mobile concrete mixer.
MIL-T-780 - Tamper, Piston-Hammer Type, Pneumatic
This specification covers a pneumatically driven, manually controlled, piston-hammer type tamper.
MIL-V-21731 - Vibrators, Concrete, Electric-Motor-Driven (S/S By A-A-50539)
This specification covers lightweight, portable, double-insulated, electric-motor-driven concrete vibrators.
MIL-V-23319 - Vibrator, Concrete, Gasoline-Engine-Driven
MIL-V-3083 - Vibrator, Concrete: Pneumatic
This specification covers an internal, single probe, concrete pneumatic vibrator.
MS39153 - Coupling, Quick Disconnect, 3-And 4-Inch, For Construction Equipment
OO-C-2817 - Central Mix Plant, Concrete, Mobile, 150 Cubic Yards Per Hour Capacity
OO-C-2818 - Concrete Spraying Machine, Mix-Elevator Type Unit, Trailer Mounted
This specification incorporates a commercial concrete mix-elevator, diesel-engine-driven, trailer mounted unit and a concrete spraying (gunning) dry mix type machine, used for applying cement mixtures to various constructions and for wet or dry sandblasting.
OO-C-2840 - Concrete Plant, Mobile, Semitrailer Mounted, Volumetric Proportioning And Continuous Mixing
OO-C-2868 - Central Mix Plant, Concrete, Mobile 100 Cubic Yards (77 Cubic Meters) Per Hour Capacity
This specification covers a complete central mix concrete plant in a single mobile unit, electric-driven, with automatic controls, capable of producing not less than 100 cubic yards (yd3) or 77 cubic meters (m3) of concrete mix per hour when accompanied with a mobile mixer unit.
OO-D-2747 - Ditching Machines, Boom Type; Crawler-Mounted, Ged And Ded (S/S By A-A-59216)
OO-M-2829 - Mixing Plant, Asphalt, Drum Type Portable, Ded, 70 Tph (63 500 Kg/Hr) Capacity
This specification covers a portable (semitrailer mounted) asphalt drum mixing plant having a mixing capacity of not less than 70 tons per hour (tph) or 63 500 kilograms per hour (kg/hr) complete with a diesel engine driven (DED) power source.
OO-R-2780 - Rollers, Motorized, Pneumatic-Tired
This specification covers a self-propelled, pneumatic-tired roller to be used for compacting fine and coarse grained soils and asphaltic concrete.
OO-R-2783 - Roller, Towed, Open-Face Type, Two Drum (S/S By A-A-59246)
This specification covers a two drum, open-face (grid) type, towed roller.
OO-R-2852 - Rollers, Motorized, Tandem, 2-Axle And 3-Axle, Ded
This specification covers tandem, 2-axle and 3-axle, motorized rollers.
OO-R-2853 - Roller, Motorized, Vibrating Drum, Articulated, Pneumatic Tire
ch is used as the microphone position of Radio Data Link, Sound Ranging AN/GRA-114.
MIL-R-49113 - Receiver, Transmitter Rt-1185()/Gra-114
MIL-R-49449 - Radio Data Link, Sound Ranging An/Gra-114 (System Of)
MIL-R-5532 - Radar Recognition Set An/Apx-7(*)
The equipment covered by this specification is an airborne Interrogator-Responsor for use in conjunction with a system of electronic identification and recognition.
MIL-R-55466 - Receiving Set, Radio An/Trq-23( )
MIL-R-55577 - Recorder-Reproducer Set, Signal Data An/Fyh-1 Packaging And Packing Of
MIL-R-5689 - Radio Set, An/Apn-1()
MIL-R-6373 - Radio Receiver And Transmitter Rt-159B-Urc-4
MIL-R-6398 - Radar Indicator Assembly An-Apa&11A (Supersedes 71&5011)
MIL-R-6519 - Radio Receiver R-355()/Arr-8A
MIL-R-70834 - Receiver, Channel X: 11784801
This specification establishes requirements for Channel X Receiver which is part of the Target Holding Mechanism/Tank Gunnery (THM/TG) Unit.
MIL-R-7182 - Radar Identification Set An/Apx-6
MIL-R-7766 - Recorder&Reproducer Set An/Anq&4
MIL-R-81000 - Reproducer-Set, Voice Warning An/Ash-19(*)
The equipment covered by this specification shall accept signals from the aircraft's fault sensors and transmit human voice warning messages to the pilot through his headset, alerting him to hazardous or potentially hazardous conditions in the aircraft.
MIL-R-81407 - Recorder-Reproducer Set, Signal Data An/Alh-6(*)
The equipment covered by this specification shall receive, monitor, and store analog and digital signals on magnetic tape.
MIL-R-81654 - Receiving Set, Countermeasures An/Alr-28(*)
MIL-R-81766 - Relay Panel Ryk-13/A24B-4(V)
The equipment covered by this specification shall be used as a component in an Aircraft Monitor and Control (AMAC) System A/A24B-4(V). Relay Panel RYK-13/A24B-4(V) shall relay arming option and delivery mode signals to a nuclear weapon.
MIL-R-8256 - Radio Receiver R-355/Arr-8A, Bench, And Pre-Flight Tests Of
MIL-R-8273 - Radar Receiver-Transmitter Rt-198B/Upx-7 (No Superseding Document)
MIL-R-83355 - Reproducer Set, Voice Warning
MIL-R-9061 - Radar Set An-Apw&11A
MIL-R-9298 - Radar Identification Set An-Apc&6A, Installation Of
MIL-R-9485 - Receiver&Transmitter, Radio Rt&316()-Apn
MIL-R-9531 - Radar Beacon An-Fpn&13()
MIL-R-9542 - Radio Set Control Group An-Ura&19()
MIL-R-9608 - Radar Recognition Set An-Upx&6()
MIL-S-12244 - Sound Ranging Set An/Tns-3( )
MIL-S-25568 - Switching Unit, Antenna Sa-498A/A
MIL-S-27079 - Simulator, Antenna Relay Sm-217-Gka-5(V)
MIL-S-27092 - Signal Characteristics Of Sage Equipment, Output And Input
MIL-S-27148 - Switching Group, Radio Frequency An/Gla-19( )
MIL-S-27952 - Seismic Sensor Electronic Unit
MIL-S-28851 - Switchboard, Teletypewriter Signal, Secure Sb-3917/Bgc And Receiver Audio Sb-3918/Brr
This specification covers two 16 by 16 switching matrices.
MIL-S-55160 - Simulator, Recognition Signal, Sm-140()/Tpx
MIL-S-55498 - Shelter Facility, Electrical Equipment S-371( )/Msc-31A
This specification covers the air or vehicular transportable shelter facility part of the Operation Center, Communications AN/MSC-31A which contains telephone switchboard, teletypewriters, local telephone circuits, and provisions for optional installation of radio equipment for use in area-type communication system. (See 6.4)
MIL-S-55511 - S
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business