[INCH-POUND]
A-A-55485/3C
13 September 2002
SUPERSEDING
A-A-55485/3B
14 March 2002
COMMERCIAL ITEM DESCRIPTION
SPECIFICATION SHEET
MOUNTING PADS, ELECTRICAL-ELECTRONIC COMPONENT,
LEAD CONVERSION, .100 DIAMETER PIN CENTER TO A LARGER DIAMETER
The General Services Administration has authorized the use of
this commercial item description (CID) as a replacement for
MIL-M-38527/3 for all federal agencies.
The complete requirements for procuring the mounting pads described herein shall consist of this
document and the issue in effect of CID A-A-55485.
CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system
which is included in the Part Identification Number (PIN) as shown in the following example (see 7.1).
/03
-001
D
A-55485
CID number
CID sheet
Dash number
Material letter
SALIENT CHARACTERISTICS.
Interface and physical dimensions. Mounting pads supplied to this CID shall be as specified herein (see
figure 1).
Material. Material shall be diallyl phthalate (D) or nylon (N).
Marking. Not applicable.
NOTES.
PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See
classification information for PIN format example.
AMSC N/A
FSC 5999
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business