A-A-55485D
5. PRODUCT CONFORMANCE PROVISIONS.
5.1 Product conformance. The products provided shall meet the salient characteristics of this CID,
conform to the producer's own drawings, specifications, standards, and quality assurance practices, and
be the same product offered for sale in the commercial market. The Government reserves the right to
require proof of such conformance.
5.2 Responsibility for inspection. Unless otherwise specified in the contract or order, the manufacturer is
responsible for the performance of all inspections, examinations, and test requirements specified herein.
Except as otherwise specified in the contract or purchase order, the manufacturer may use his own or
any other facilities suitable for the inspection requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of the inspections, examinations, or
tests set forth in this description where they are deemed necessary to assure that the products conform to
prescribed requirements.
5.3 Certificates of compliance. Each manufacturer desiring to be listed as a suggested source of supply
(see applicable CID sheet) shall submit a DLA Land and Maritime certificate of compliance to DLA Land
and Maritime-VAT. This certificate shall state that the manufacturer's product meets all the requirements
of this CID. In addition, a certificate of compliance shall accompany all mounting pads supplied to this
CID.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES.
7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID.
See section 2 for PIN format example.
7.2 Environmentally preferable material. Environmentally preferable materials should be used to the
maximum extent possible to meet the requirements of this specification. As of the dating of this
document, the U.S. Environmental Protection Agency (EPA) is focusing efforts on reducing 31 priority
chemicals. The list of chemicals and additional information is available on their website
https://www.epa.gov/osw/hazard/wastemin/priority.htm. Included in the EPA list of 31 priority chemicals
are cadmium, lead, and mercury. Use of these materials should be minimized or eliminated unless
needed to meet the requirements specified herein (see Section 3).
7.3 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and
submission of these mounting pads to DLA Land and Maritime under the Military Parts Control Advisory
Group (MPCAG) evaluation program, CAGE code 58536 should be used.
7.4 Source of documents.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D4067 - Standard Specification for Reinforced and Filled Polyphenylene Sulfide.
ASTM D6778 - Standard Specification for Polyoxymethylene (POM, Acetal) Molding and
Extrusion Materials.
Standard Specification for Polyamide Molding and Extrusion Materials (PA).
(Application for copies should be addressed to ASTM International, PO Box C700, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
(Industry association specifications and standards are generally available for reference from libraries.
They are also distributed among technical groups and using Federal agencies.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business