INCH-POUND
MIL-PRF-83531C
2 October 2008
SUPERSEDING
MIL-PRF-83531B
15 December 1998
PERFORMANCE SPECIFICATION
DELAY LINES, PASSIVE,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for fixed passive (tapped and untapped)
pulse delay lines. The specification has two product levels, a high reliability screening level "M" and
screening level "C".
1.2 Classification.
1.2.1 Part or Identifying Number (PIN). Delay lines specified herein (see 3.1) will be identified by a PIN
which consists of the military designator, the basic number of the associated specification, and assigned
dash number (see 3.1), and a screening level that indicates the level of quality and reliability (see 1.3.1).
The PIN will be in the following form derived as indicated:
Screening Level "M"
M83531
/01
-001
⎢
⎢
⏐
Specification sheet
Specification
Dash number
number
sheet number
(See table I)
(note zero)
Screening Level "C"
C83531
/01
-001
⎢
⎢
⏐
Specification sheet
Specification
Dash number
number
sheet number
(See table I)
(note zero)
Comments, suggestions or questions on this document should be addressed to Defense Supply Center Columbus,
ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990), or emailed to relay@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
.
database at https://assist.daps.dla.mil
AMSC N/A
FSC 5999
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business