MIL-STD-1276 Leads For Electronic Component PartsThis standard establishes the method of identifying, specifying, and limiting to a minimum the combinations of basic materials, the thickness and composition of the plating used therewith, and the sizes of wire and flat wire ribbon leads on electronic and electrical parts when they are to be soldered or welded during assembly in equipment.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17

MIL-STD-1276H

ASTM INTERNATIONAL

ASTM 85                        -  Standard Specification for High Conductivity Tough-Pitch Copper Refinery

Shapes.

ASTM 8122/8122M        -  Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy

(Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled 8ar. ASTM 8170                    -  Standard Specification for Oxygen-Free Electrolytic Copper-Refinery Shapes. ASTM 8452                    -  Standard Practice for Electronic Application, Wire, Steel, Copper-Clad.

ASTM 8465                    -  Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled 8ar. ASTM 8487                    -  Standard Practice for Measurement of Metal and Oxide Coating Thickness by

Microscopical Examination of a Cross-section.

ASTM 8488                    -  Electrodeposited Coatings of Gold for Engineering Uses. ASTM 8545                    -  Standard Specification for Electrodeposited Coatings of Tin.

ASTM 8567                    -  Standard Practice for Measurement of Coating Thickness by the 8eta

8ackscatter Method.

ASTM 8571                    -  Standard Practice for Adhesion of Metallic Coating.

ASTM 8592                    -  Standard Specification for Copper-Zinc-Aluminum-Cobalt or Nickel-Alloy Plate, Sheet, Strip, and Rolled 8ar, Specification for.

ASTM 8700                    -  Standard Specification for Electrodeposited Coatings of Silver for Engineering

Use.

ASTM 8735                    -  Standard Test Method for Porosity in Gold Coatings on Metal Substrates by

Nitric Acid Vapor.

ASTM 8741                    -  Standard Test Method for Porosity in Gold Coatings on Metal Substrates by

Paper Electrography.

ASTM F15                      -  Standard Specification for Iron-Nickel-Cobalt Sealing Alloy.

ASTM F29                      -  Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications. ASTM F30                      -  Standard Specification for Iron-Nickel Sealing Alloy.

(Copies of these documents are available online at https://www.astm.org/ or from the ASTM INTERNATIONAL, P.O. 8ox C700,100 8arr Harbor Drive, West Conshohocken, PA 19482-2959.)

SAE INTERNATIONAL

SAE-AMS2404        -             Nickel, Electroless, Plating. SAE-AMS2418        -             Plating, Copper.

SAE-AMS P-81728            -             Plating, Tin-Lead (Electrodeposited). SAE-AMS-QQ-N-290         -             Nickel Plating (Electrodeposited).

(Copies of these documents are available online at https://www.sae.org/ or from SAE INTERNATIONAL, 400

Commonwealth Drive, Warrendale, PA 15096-0001).

2.4  Order of precedence.  Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

4